Below is a list of NCTS5 error codes.
Departure Error Codes
IE056 Rejection Message
Business Rejection Type
| Code |
Description |
| 013 |
Amendment rejection |
| 014 |
Invalidation rejection |
| 015 |
Declaration rejection |
| 054 |
Release request rejection |
| 141 |
Rejection of information about non-arrived movement |
| 170 |
Presentation notification for the pre-lodged declaration rejection |
Rejection Codes
| Code |
Description |
| 12 |
Message with functional error(s) - Violation of rules & conditions |
| 4 |
Other reasons |
| 7 |
Guarantee not valid for this customs territory |
Functional Error Codes
| Code |
Description |
| 12 |
Value of an element in a message is outside the predefined set of values or not part of the applicable business/technical code list. This type of error is applicable to all elements with code values, so it is also applicable to those elements that identify a message type. |
| 13 |
A mandatory/required element is missing in the received data following the validation of rule or condition, e.g. a required element is not present. |
| 14 |
Rule violation |
| 15 |
An element is not allowed to have a value due to the following two reasons: The element is not allowed to be present according to some additional condition, e.g. if type of packages has the value 'UNPACKED' then number of packages can not have a value (condition C0060).
|
| 26 |
The same interchange is received again. Duplication is detected by reception of a message identifier that has already been received. |
| 50 |
An element is not valid (value, format or repetitions) according to a transitional constraint [downgrade & upgrade conversion]. |
| 51 |
An error reported by the Convertor in the Technical Message Structure (EDIFACT level) validation on the downgraded message (ECS-P2/NCTS-P4 message) [Downgrade conversion from NCTS-P5/AES to NCTS-P4/ECS-P2]. |
| 52 |
An error reported by the Convertor in the Functional Message Structure (ECS-P2/NCTS-P4 XML or rules/conditions) validation on the downgraded message (ECS-P2/NCTS-P4 message) [Downgrade conversion from NCTS-P5/AES to NCTS-P4/ECS-P2]. |
| 90 |
Unknown MRN |
| 92 |
Message out of sequence |
| 93 |
The structure of the MRN does not conform to specifications |
IE051 No Release for Transit
| Code |
Description |
| B1 |
Unsuccessful control results |
| C1 |
Goods not available for control |
| D1 |
Required special documents not presented |
| G1 |
Guarantee not valid |
| G2 |
Cash guarantee not provided |
| M1 |
Means of transport not roadworthy |
| N1 |
Non agreement reached under release flow |
| Q1 |
Declaration is filled in with invalid information |
| R1 |
Non compliance to release time guidelines |
| S1 |
Customs authorization for special seals not valid |
| X1 |
Underlying export declaration not in adequate status anymore |
| ZZ |
Other |
IE055 - Guarantee not Valid
| Code |
Description |
| G01 |
Guarantee does not exist |
| G02 |
Guarantee exists, but not valid |
| G03 |
Access code not valid |
| G04 |
Holder of guarantee is not equal to holder of transit procedure in declaration |
| G05 |
Individual guarantee voucher already used |
| G06 |
Use restriction: No suspended goods |
| G08 |
Not valid for country of transit or country of destination |
| G09 |
Reference/Guarantee amounts NOT sufficient |
| G10 |
Individual guarantee by guarantor already used |
| G11 |
Customs office of departure and customs office of destination do not correspond (Guarantee type '2') |
| G12 |
Declared commodity code, and commodity code in guarantee do not match |
| G13 |
The GRN and the guarantee type do not match |
Arrival Error Codes
IE057 Message
Business Rejection Type
| Code |
Description |
| 007 |
Arrival notification rejection |
| 044 |
Unloading remarks rejection |
Rejection Codes
These are the same as for the IE057 rejection message.
Functional Error Codes
These are the same as for the IE056 rejection message.
Comments
Please sign in to leave a comment.